de Tomaso Pantera LED Group4 Taillight Conversion
LED Group4 Park/Brake Light Part # GP4-B Price $184.00 USD per pair LED Group4 Signal Light Part # GP4-S Price $184.00 USD per pair LED Group4 Reverse Light Part # GP4-RVRS Price $170.00 USD per pair
PRODUCTS
FUSE PANEL IGNITION SWITCH HEADLIGHT / MOTOR RAD FAN CONTROLLER RADIATOR AND FANS AIR CONDITIONING CONSOLE SWITCH INTERFACE GAUGE CONNECT SYSTEM ROCKER SWITCHES WINDOW SWITCHES GEN LIGHT RESISTOR PARKING BRAKE CONTROL DUAL USB CHARGER SIPEA REPLACEMENT RELAY LED GAUGE LAMP LED DOME & LED FOOTWELL LED SIDE MARKER LAMPS LED DR COURTESY & JAMB LED LICENSE PLATE LAMP LED SIGNAL LIGHTS LED TAILLIGHTS GROUP4  LED LIGHTS LED SIGNAL FLASHER ALTERNATOR KIT BRAKE SW & TACH ADAPTER ELECTRICAL COMPONENTS WIRE HARNESS
> Brake LED's illuminate 0.20 seconds faster than incandescent bulbs. (a vehicle moving at a speed of 65 miles per hour will travel a distance of 19 feet in 0.20 seconds) > No filament to burn-out, 24 high brightness LEDs with a minimum life of 50,000 hours. > Scrolling turn signal illumination, circular sweeping illumination counter-clockwise on the left side and clockwise on the right side. This is not possible with after-market bulb replacement type. > Electronically controlled constant brightness, even at idle engine speed. > Simple wiring, matching color wires to the factory harness. > Plated metal LED reflector replaces, the factory faded silver plastic reflector. > Rusty or inoperative lamp sockets are not used, LED arrays connect directly to the Pantera harness connector. > Modern appearance without distorting the original design. > No mechanical modifications required allowing return to the original incandescent bulbs > The Reverse LED array converts the reverse section of the tail lights to brake lights. The high power red LED array illuminates the clear reverse light lens when the brakes are applied. > Placing the shifter in reverse gear activates the high power white LED array illuminate the lens and the red LEDs are disabled. The LED Reverse Conversion has two different color LEDs. White LEDs are energized when the transaxle is in reverse. When reverse is not engaged the reverse section energizes red LEDs when the brakes are applied. This causes the lens to emit more red light and is more noticeable during braking.
Amber LED turn signal section with circular scrolling LEDs.
Red LED parking/brake light section.
Red and white LED’s in the reverse light section for reverse and brake function.
Amber LED turn signal and red LED parking lights (reflectors are illuminated from the camera flash)
Amber LED turn signal lights. (reflectors are illuminated from the camera flash)
Red parking lights (reflectors are illuminated from the camera flash)
Click on picture to see Pantera-Electronics  LED technology
Copyright © 2024
an Engineering Company Merging Automotive and Electronic Technologies PANTERA ELECTRONICS HOME RECOMMENDATIONS HOW TO ORDER CRITICAL CONTROLS LED LIGHTING SUPPORT GROUP4  LED LIGHTS